News

The Practical Guide to Custom Press Brake Machine: Design Steps& Key Considerations

In modern metal fabrication, one size fits all solutions are rare. When bending small brackets or large panels, standard machines lack versatility and practicality, unlike a Custom Press Brake Machine. But what is involved in developing a Custom Press Brake? What steps, recommendations, and considerations do you take? Who is the leader in this niche? These questions, and more, are explained in this article to demonstrate why APEX CNC is the best option for your Custom Press Brake Machine.

What is a Custom Press Brake Machine?

A Custom Press Brake Machine is a bending solution. This can either be hydraulic or a servo-electric system that is configurable to your production requirements and includes options like the bed length, control software, and tonnage. Custom solutions go beyond what is offered in a standard unit, by integrating the materials of your workpieces and the radii and lengths of the bends. We factor the space that is available to you. We minimize waste and optimize your operating costs and production.

Designing a Custom Press Brake Machine

Designing a Custom Press Brake Machine involves a number of steps, all of which are mentioned below.

Step 1: Requirements Analysis

Before you can begin to draft the designs, you need to consider the following to capture your bending needs:

•Material types: What materials do you plan to bend? (stainless steel, aluminum, steel, exotic alloys)

•Thickness: What is the allowable range for thickness? (0.5 mm to 25 mm+)

•Maximum length of bends: What is the maximum length of bends? (This is for selection of the machine’s bed length)

•Tonnage: What is the required tonnage? (This is determined by the material, thickness of a workpiece and opening of the V-die)

•Production volume: What is the expected production volume? (This will be used to decide the level of automation, from low to high based on production volume)

When estimating tonnage, dimensions should be done with 15 – 20 % safety margin for required modifications later.

Step 2: Engineering the Structural Frame

The frame is essentially the heart of any Custom Press Brake Machine.

•Material: Welded steel as it provides greater rigidity compared to cast iron in heavy duty applications.

•Design: Finite element analysis (FEA) must be performed to ensure deflection does not exceed design limits.

•Reinforced side plates with a deep throat to be utilized.

Deflection will be stabilized with stress-relief heat treatment and precision machining.

Step 3: Hydraulic or Servo-Electric?

The choice impacts speed, accuracy, force required, and noise.

•Hydraulic (electric-hydraulic servo): Most suitable for heavy-duty applications and deep bending. All cylinder movements can be performed simultaneously and in a synchronized manner.

•Servo-electric: More suitable for cleaner applications where speed and quiet operations with a more than 50% reduction in energy consumption are required. Best for a mid-tonnage press.

For general purpose Custom Press Brake Machine applications, APEX CNC recommends the hybrid – WE67K series.

Step 4: CNC Controller and Axis Configuration

The new Custom Press Brake Machines are built with smart technology.

•Minimum requirement for machine purchase: 3+1 axes (Y1, Y2, X, and crowning).

•Advanced option: 8+1 axes and above that enable multi-step bends, tilt correction, and robotic integration.

•User interface: Touchscreen with 3D bending simulation and offline programing capable of optimizing bend sequence.

For the most complex bending applications, the DA69T with the APEX CNC’s touch screen significantly reduces set up time by about 70%.

Step 5: Tooling and Backgauge Customization

Tooling influences bend angle, radius, and clearance.

•Select punch and die sets according to specific configurations of parts and geometries including but not limited to acute angles, various radii, and edge hemming.

•Backgauge design: With highly precise, servo-driven backgauges of 8+1 axes, you are able to set the fingers to accommodate complex parts.

Custom Press Brake Machines are designed to include Tool holders, quick clamping systems, and automated tool changers according to customer requirements.

Step 6: Safety and Crowning Systems

Never trade off safety for consistency in bending.

•Safety features include: Laser barriers, light curtains, and two-hand interlocking guards.

•Crowning: Automatically compensates for frame deflection along the bed for consistent bend angles over the entire length.

APEX CNC integrates all these elements as standard on their custom machines, for CE & ISO.

Key Considerations and Best Practices

Take these into account when ordering a Custom Press Brake Machine.

��� Material Compatibility

•Ensure the machine’s tonnage curve covers your hardest material at full length.

•For high-tensile steel, demand a Custom Press Brake Machine with reinforced rams.

��� Accuracy and Repeatability

•Look for dual-cylinder synchronization (hydraulic or mechanical) with closed-loop feedback.

•Angle repeatability should be ±0.5° or better – APEX CNC’s machines achieve consistent results even after thousands of cycles.

��� Energy Efficiency

•A well-designed Custom Press Brake Machine can reduce oil tank capacity by 70% (as seen in APEX’s WS67K series) and cut duty cycle by 10%.

•Servo-electric drives offer up to 50% energy savings versus conventional hydraulics.

��� Maintenance and Service Life

•Choose modular components (pumps, valves, seals) that are easy to replace.

•APEX CNC machines are built with long-life welded steel frames and require minimal maintenance – a key reason they operate reliably in 130+ countries.

��� Safety First

•Integrate laser protection or light curtains as mandatory, not optional.

•Train operators on the specific Custom Press Brake Machine interface – APEX provides on-site and remote training.

Why APEX CNC

For over three decades APEX CNC has been delighting clients over 130 countries around the globe. They utilize 60,000 square meters of manufacturing space and have 540 technicians at their disposal.

Key Advantages of APEX CNC:

•Bending: Achieve perfect angles even with complicated multi-bend components.

•Strong Structure: Some welded frames give little deflection with structural integrity and great performance.

•Smart Control: Certain CNC Controllers enable simplified programmable control for straightforward setups and bend sequences.

•Energy Efficient: Their WS67K series decreased oil tank capacity by 70%. A decrease in the duty cycle of 10% combined with a 50% improvement in energy efficiency was an additional benefit.

Versatile product range:

•Sheet Metal Press Brake WS67K series – High stability, long service life.

•Genius Press Brake WE67K series – Electro-hydraulic servo, fast and safe, 8+1 axes back gauge.

•Small Press Brake WE67K series – High cost performance, low failure rate.

•CNC Hydraulic Press Brake (8+1 axis) – Dual-cylinder synchronization, touchscreen interface, welded steel durability.

•Safety and crowning technologies – Laser protection, light curtains, automatic crowning as standard.

•Long service life – Minimal maintenance and low production costs over decades.

“Our design philosophy focuses on efficiency, safety, and reliability. “The machines run silently and need very little servicing; this clearly decreases production costs. As a result, customers gain both increased productivity and savings on the cost of operating over time.” – APEX CNC Engineering Team

From designing a Custom Press Brake Machine for a small workshop to supplying a complete Custom Press Brake Machine for a fully automated production line, APEX CNC provides everything from entry-level 3+1 axis machines to fully automated high-speed 8+1 axis systems incorporating Automatic Tool Changers.

Conclusion

The design of a Custom Press Brake Machine involves a number of steps: needs analysis, the design of a robust frame, the choice of drive, the installation of CNC control, the design of personalized tools, and the implementation of safety measures. The best practices of accuracy, energy efficiency, and ease of maintenance will result in very low life cycle costs to the customer.

For a comprehensive bending ecosystem based on 30 years of experience, 540 engineers, and successfully operating in 130 countries, partner with APEX CNC. Reach out for a free consultation and customized quotation.

FAQ – Custom Press Brake Machine

Q1: How long does it take to produce a custom press brake machines?

A: That depends on the complexity of the machines. At the most, it usually is about 8 weeks. At the very minimum, it might take us about 4 weeks to produce your machines. APEX also has some options for expediting your projects if requested.

Q2: Can you customize hydraulic models as well as servo-electric models?

A: Yes. APEX CNC customizes both types – from high-tonnage hydraulic (WE67K series) to energy-saving servo-electric systems.

Q3: Is tooling and training included?

A: Yes. Custom machines will include proprietary tooling, and you will be supported for training and technical assistance 24/7.

Q4: How can I get a quote?

A: You can obtain a quote through APEX CNC’s website. You can also contact our sales team. You will need to provide the materials you plan to use, their thickness, and the required pipe bender length. We will provide you with a quote as soon as possible, and this service is free of charge.

Q5: How about CE certification of machines?

A: Yes. All APEX CNC custom made press brakes are CE compliant and will pass all ISO and other safety standards.

Contact Us

Get A Free Consultation